OEM Custom Stainless Steel CNC Machining

Machining techniques: CNC Machining, Precision machining, cnc milling

Size: Custom size

Service type: OEM custom parts machining

Material: Stainless Steel 304

Part type: Precision stainless steel machining parts, stainless steel milling parts, precision stainless steel milling component

Part application: Medical device stainless steel machined components

MOQ: Single prototype is accepted

Item name: Stainless steel cnc machining parts

Place origin:China

Lead time: for stainless steel prototype:within one week. For low-volume manufacturing: 14-20days

Model name: CNC machining stainless steel parts


Specifications of Our OEM Custom Stainless Steel CNC Machining

Part Name

Custom Stainless Steel CNC Machining Parts

Manufacturing Process

Precision CNC Milling, CNC Boring, Tapping

Available CNC Machining Materials

Aluminum, Titanium, stainless steel, steel, brass, copper, abs, pom, peek, PA, PEI, PTFE, PMMA, PC, PBT

Tolerance of CNC Machining


Surface Finishes

Polishing, chrome plating, zinc plating, nickel plating, anodizing, Nitrogenation, sandblasting, powder

coating, etc.

Drawing format



Over ten years of stainless steel parts machining and prototyping

Quality control

Inspecting during processing, and make 100% inspection before shipping

Lead time

For stainless steel cnc machined prototypes: within 1 week.

For mass production of stainless steel machined parts: depending on the quantity and part’s complexity

Guide to OEM Custom Stainless Steel CNC Machining

One of the notable features of stainless steel is its high hardness, and its comprehensive mechanical properties are higher than those of general structural steel. Therefore, some matters need to be paid attention to in CNC machining of custom stainless steel parts:

First, choose the right stainless steel knife material. Due to the high cutting force and high cutting temperature used in CNC machining of stainless steel parts, it is necessary to choose carbide tool materials with high strength and good thermal conductivity.

Secondly, the roughness value should be small when the rake face is sharpened. In order to avoid the phenomenon of chips sticking to the knife, the front and flank surfaces of the tool should be sharpened carefully to ensure a small roughness value, thereby reducing the flow of chips and preventing chips from sticking to the knife.

Third, the cutting edge of the stainless steel parts tool should be kept sharp to reduce the phenomenon of hardening during processing. The feed rate and back cutting amount should not be too small to prevent the tool from cutting in the hardened layer and affect the life of the tool

Fourth, pay attention to the grinding of the chip breaker. Due to the strong and tough characteristics of CNC machining of stainless steel parts, the chip breaker on the rake face of the tool should be ground moderately, so as to facilitate the discharge of chips and chip breaks during the cutting process of CNC machining.

Finally, choose the right cutting oil. Since stainless steel is prone to sticking and has poor heat dissipation, it is very important to choose cutting oil with good anti-sticking and heat dissipation in CNC boring. Cutting oil with good performance can not only greatly improve the efficiency of stainless steel CNC machining, but also effectively protect the tool and prolong the service life of the CNC machine.

As a precision machining manufacturer, YS Rapid is professional at manufacturing precision stainless steel cnc machining parts, stainless steel turning parts, and CNC machining precision parts from other materials to a wide variety of OEM customers. Contact us today to get an instant online quotation for your machined parts.

Get in Touch With YS Rapid
Get in Touch With YS Rapid

Upload your 3D and 2D drawings to us, and a quotation will be provided to you within 24 hours. Also our sales engineer will contact you directly regarding your rapid prototype and cnc machinery parts quote to ensure you have received the quotation and to answer your questions.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept